1. Kong, X.*,Wu, D.J., Cai, C.S., Liu, Y.Q. (2012). “New Strategy of Substructure Method to Model Long-span Hybrid Cable-Staye d Bridges under Vehicle-induced Vibration.” Engineering Structures, 34, 421–435.（pdf）
2. Xiong, W., Cai, C.S.,Kong, X.(2012). “Instrumentation Design for Bridge Scour Monitoring Using Fiber Bragg Grating Sensors.” A pplied Optics, Vol. 51, No. 5, 547-557. （pdf）
3. Kong, X.,Cai, C.S., Hou, S. (2013). “Scour effect on a single pile and development of corresponding scour monitoring methods.” Smart Materials and Structures, 22 (5), 055011. （pdf）
4. Kong, B., Cai, C.S. and Kong, X.(2013). “Thermal behaviors of concrete and steel bridges after slab replacements with GFRP honeycomb sandwich panels.” Engineering Structures, 56, 2041-2051. （pdf）
5. Nair, A., Cai, C. S., Pan, F., and Kong, X.(2014). “Acoustic emission monitoring of damage progression in CFRP retrofitted RC beams.” Structural Monitoring and Maintenance, Vol. 1, No. 1, 111-130.（pdf）
6. Kong, B., Cai, C.S.,Kong, X.(2014). ”Thermal property analysis and applications of GFRP panels to integral abutment bridges.”Engineering Structures,Vol.76, 1–9.（pdf）
7. Xiong, W., Cai, C.S., Kong, B.,Kong, X.(2014). “CFD simulation and analysis for bridge scour development using dynamic mesh updating technique.” J. of Computing in Civil Engineering, Vol. 30, Issue 1.（pdf）
8. Cai, C.S., Hu, J.X., Chen, S.R., Han, Y., Zhang, W.,Kong, X.(2015). “A coupled wind–vehicle- bridge system and its applications: a review.” Wind and Structures, 20 (2), 117-142.（pdf）
9. Kong, B., Cai, C.S. and Kong, X.(2015). “Field Monitoring Study of an integral abutment bridge supported by prestressed precast concrete piles on soft soils.” Engineering Structures, 104, 18-31.（pdf）
10. Kong, X.,Cai, C.S., Kong, B. (2015). “Damage detection based on transmissibility of a vehicle and bridge coupled system.” J. of Engineering Mechanics, 141 (1), 04014102.（pdf）
11. Kong, X.*,Cai, C.S., Hu, J.X. (2015). “Scour monitoring on a field bridge using FBG-based instrumentation”, Structural Health Monitoring 2015, doi: 10.12783/SHM2015/364.（）
12. Kong, X.,Cai, C.S. (2016). “Scour effect on bridge and vehicle response under bridge-vehicle-wave interaction.” J. of Bridge Engineering, Vol. 21, Issue 4.（pdf）
13. Kong, X.,Cai, C.S., Kong, B. (2016). “Numerically Extracting Bridge Modal Properties from Dynamic Responses of Moving Vehicles.” J. of Engineering Mechanics, Vol.142, Issue 6.（pdf）
14. Jiang, Y. B., Liao, G. Y.,Kong, X.(2016). “Stiffness study of inner concave cable-arch structure based on an efficient method.” Advances in Structural Engineering,19(12), 1927-1939.（pdf）
15. Liu, Y.,Kong, X., Cai, C.S., Wang, D. (2016). “Driving Effects of Vehicle-induced Vibration on Long-span Suspension Bridges.” Structure Control and Health Monitoring, DOI: 10.1002/stc.1873. pdf）
16. Yin, Y.F., Liu, Y., Deng, L., andKong, X.(2017). “Dynamic behavior of damaged bridge with multiple cracks under moving vehicular loads.”International Journal of Structural Stability and Dynamics, 17(2).（pdf）
17. Kong, X.*,Cai, C.S., Hu, J.X., Xiong, W., Peng, H. (2017). “Field Application of an Innovative Bridge Scour Monitoring System with Fiber Bragg Grating Sensors.” J. Aerospace Engineering, Vol. 30, Issue 2.（pdf）
18. Kong, X.,Cai, C.S., Deng, L., Zhang, W. (2017). “Using Dynamic Responses of Moving Vehicles to Extract Bridge Modal Properties of a Field Bridge.” ASCE J. of Bridge Engineering, Vol. 22, Issue 6.（pdf）
19. Kong, X.*, Ho, S.C.M, Song, G.B., Cai, C.S. (2017). “Scour Monitoring System using Fiber Bragg Grating Sensor and Water-swellable Polymers.” ASCE J. of Bridge Engineering, Vol. 22, Issue 7.（pdf）
20. Kong, X.,Cai, C.S., Hu, J.X. (2017). “The state-of-the-art on framework of vibration-based structural damage identification for decision making.” Applied Science, 2017, 7, 497.（pdf）
21. Nair, A., Cai, C. S., and Kong, X.*(2018). “Studying Failure Modes of GFRP Laminate Coupon Specimens Using Scanning Electron Microscopy Technique.” ASCE J. of Aerospace Engineering, 31 (6).（pdf）
22. Nair, A., Cai, C. S., and Kong, X.*(2019). “Studying Failure Modes of GFRP Laminate Coupons Using AE Pattern Recognition Method.” ASCE J.Aerospace Engineering, 32(4).（pdf）
23. Nair, A., Cai, C. S., and Kong, X.*(2019). “Acoustic Emission Pattern Recognition in CFRP Retrofitted RC Beams for Failure Mode Identification.” Composites Part B: Engineering, 161, 691–701.（pdf）
24. Nair, A., Cai, C. S., and Kong, X.*(2019). “Bridge Retrofitting Using FRP-wrapped Balsa Wood Deck: Experimental Study and Field Evaluation.” ASCE J. Aerospace Engineering, 32(5).（pdf）
25. Nair, A., Cai, C. S., and Kong, X.*(2020). “Using Acoustic Emission to Monitor Damage Modes in CFRP Strengthened Concrete Structures.” ASCE J. Aerospace Engineering,33 (1).（pdf）
26. Deng, L., Chu, H.H., Shi, P.,Kong, X.(2020). “Region-based CNN method with deformable modules for visually classifying concrete cracks.” Applied Sciences,10(7), 2528.（pdf）
27. Wang, W., Shi, P., Deng, L., Chu, H.H.,Kong, X.(2020). “Residual Strength Evaluation of Corroded Textile-Reinforced Concrete by the Deep Learning-Based Method”, Materials, 13(14), 3226;（pdf）
28. Wang, G.C., Zhang, J.,Kong, X.*(2020). “Study onPassenger Comfort based on Human-Bus-Road Coupled Vibration”, Applied Sciences, 2020, 10(9), 3254;（pdf）
29. Yu, X.C., Xiang, G., Collopy, H., Wang, W.,Kong, X.(2020). “Trajectory tracking of a model rocket falling into the towing tank: experimental tests vs. numerical simulations.” J. of Aerospace Engineering, Vol. 33 (5).（pdf）
30. Chen, Z., Deng, L.,Kong, X.(2020). “Analysis of factors affecting the accuracy of moving force identification.” International Journal of Structural Stability and Dynamics, 2150019.（pdf）
31. Zhan, J.W., Zhang, F., Siahkouhi M.,Kong, X., Xia H. (2020). “A damage identificationmethod for connections of adjacent box-beam bridges using vehicle–bridge interaction analysis and FE model updating.” Engineering Structures.（pdf）
32. Li, J.Z, Kong, X.*, Yang, Y.L., Deng, L., Xiong, W. (2022). “CFD Investigations of Tsunami-Induced Scour around Bridge Piers”, Ocean Engineering, Vol.24, 110373（pdf）
33. Li, J.Z, Kong, X.*, Yang, Y.L., Yang, Z.W., Hu, J.X. (2022). “Optical Flow Based Measurement of Flow Field in Wave-Structure Interaction”, Ocean Engineering,
34. Kong, X., Zhang, J., Wang, T.Y., Deng, L.*, Cai, C.S. (2022). “Non-contact vehicle weighing method based on tire-road contact model and computer vision techniques”, Mechanical Systems and Signal Processing, Volume 174, 15 July 2022, 109093（pdf）
35. Kong, X., Luo, K., Ji, W.*, Tang, Q.Y., Deng, L. (2022). “Study on dynamic characteristics of improved composite box girder bridge with corrugated steel webs”, J. of Bridge Engineering, Vol. 27 (6), (pdf)
36. Kong, X., Wang, T.Y., Zhang, J.*, Deng, L., Zhong, J.W., Cui, Y.P., Xia, S.D. (2021). “Tire Contact Force Equations for Vision-based Vehicle Weight Identification”, Applied Sciences, 12(9), 4487;（pdf）